es07b-m, ES07D-M vishay semiconductors document number 85192 rev. 1.1, 01-sep-10 www.vishay.com 1 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small surface mount ultrafast diodes features ? for surface mounted applications ? low profile package ? ideal for automated placement ? glass passivated ? high temperature soldering: 260 c/10 s at terminals ? wave and reflow solderable ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to iec 61249-2-21 definition mechanical data case: do-219ab (smf) polarity: band denotes cathode end weight: approx. 15 mg packaging codes/options: 18/10k per 13" reel (8 mm tape) 08/3k per 7" reel (8 mm tape) parts table absolute maximum ratings t amb = 25 c, unless otherwise specified note: 1) mounted on epoxy glass pcb with 3 mm x 3 mm, cu pads ( 40 m thick) 17249 part ordering code marking remarks es07b-m es07b-m-18 or es07b-m-08 gb tape and reel ES07D-M ES07D-M-18 or ES07D-M-08 gd tape and reel parameter test condition part symbol value unit maximum repetitive peak reverse voltage es07b-m v rrm 100 v ES07D-M v rrm 200 v maximum rms voltage es07b-m v rms 70 v ES07D-M v rms 140 v maximum dc blocking voltage es07b-m v dc 100 v ES07D-M v dc 200 v maximum average forward rectified current t tp = 105 c i f(av) 1.2 a t a = 65 c 1) i f(av) 0.5 a peak forward surge current 8.3 ms single half sine-wave t l = 25 c i fsm 30 a
es07b-m, ES07D-M vishay semiconductors document number 85192 rev. 1.1, 01-sep-10 www.vishay.com 2 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com thermal characteristics t amb = 25 c, unless otherwise specified note: 1) mounted on epoxy glass pcb with 3 x 3 mm, cu pads ( 40 m thick) electrical characteristics t amb = 25 c, unless otherwise specified note: 1) pulse test, 300 s pul se with 1 % duty cycle typical characteristics t amb = 25 c, unless otherwise specified parameter test condition symbol value unit thermal resistance junction to ambient air 1) r thja 180 k/w operating junction and storage temperature range t j , t stg - 55 to + 150 c parameter test condition symbol min. ty p. max. unit maximum instantaneous forward voltage 1 a 1) v f 0.98 v maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 10 a t a = 100 c i r 50 a reverse recovery time i f = 0.5 a, i r = 1 a, i rr = 0.25 a t rr 25 ns typical capacitance 4 v, 1 mhz c j 4pf figure 1. typical forw ard characteristics 0.001 1 0.1 0.01 10 00.4 0.2 0.6 0. 8 1.0 1.2 1.4 1 8 242 i f (a) v f ( v ) typical at 150 c typical at 100 c typical at 25 c figure 2. forward current derating curve 0 1.2 1.0 0. 8 0.4 0.6 0.2 1.4 050 25 75 100 125 150 1 8 243 a v erage for w ard c u rrent (a) temperat u re (am b ient or tie) (c) am b ient temperat u re tie point temperat u re
es07b-m, ES07D-M vishay semiconductors document number 85192 rev. 1.1, 01-sep-10 www.vishay.com 3 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): do-219ab (smf) figure 3. typ. diode capacitance vs. reverse voltage 0 6 5 4 2 3 1 7 0.1 1 10 100 1 8 244 c d (pf) v r ( v ) f = 1 mhz figure 4. typical reve rse characteristics 040 8 0 120 160 200 v r ( v ) i r ( a) 1000 100 10 1 0.1 0.01 1 8 245 t j = - 50 c t j = 150 c t j = 25 c t j = 50 c t j = 75 c t j = 100 c t j = 125 c t j = 0 c foot print re commendation: re v . 3 - date: 13. march 2007 doc u ment no.:s 8 - v -3915.01-001 (4) 1.3 (0.051) 1.3 (0.051) 2.9 (0.114) 1.4 (0.055) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.13 8 ) 0. 8 5 (0.033) 0.35 (0.014) 1.2 (0.047) 0. 8 (0.031) 1.9 (0.075) 1.7 (0.067) 1.0 8 (0.043) 0. 88 (0.035) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 0 (0.000) 5 5 created - date: 15. fe b r u ary 2005 17247 detail z enlarged
es07b-m, ES07D-M vishay semiconductors document number 85192 rev. 1.1, 01-sep-10 www.vishay.com 4 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com blistertape dimensions for smf in millimeters 1 8 513 ps doc u ment- n o.: s 8 - v -3717.02-001 (3)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
